Bathroom vanity install & Frustration

I struggled for a whole afternoon trying to install the kids' bathroom vanity. I was feeling quite hopeful that I'd be able to install the bathroom vanity in one afternoon. Turns out that wouldn't be the case.

First, I discovered I was going to have to redesign and reconnect the drain pipe into the main waste pipe.

Second, I was going to have to cut away some portions of the vanity for the pipes to fit inside it. That took a little bit of planning but I eventually got that done.

Finally, the best case scenario for installing a vanity is to level it and secure it to the wall by screwing it into some studs. Well, I could only find one stud to drill into. I found the stud pretty quickly and marked it's location. I even tested it by drilling into it.

But then, I couldn't find anymore. Typically, they're spaced 16" apart but my stud finder was telling me otherwise. I knocked and I knocked on the wall listening for the thud of a stud. Nothing. I kept sweeping the stud finder in various directions, high and low, slow and fast. Nothing. I knocked all over the place. Nothing. I finally gave in and started drilling holes along the length of the wall. Again, nothing. At least it confirmed that I wasn't crazy. I couldn't believe it, there weren't anymore studs I could use. I was at a loss as to what I should I do and I accomplished little with the vanity. It was a bad day.

Comments

Tile prep: The Challenge of Cutting Curves

I successfully made all of the straight cuts on the tiles but it was quite a process. After the first few cuts, I decided I would gradually cut my way towards the cut line. I kept cutting away portions of the tile until I got to where I wanted it to be. This worked quite well. All was going well until I had to start cutting the hole out of the tile to make way for the toilet. A Home Depot employee recommended I use a diamond tipped blade for a jig saw to make the cut. This way, it'll go faster and still be able to guide the cut along the curve. It didn't work very well. The blade barely got through the tile. I had to lean on the saw to get it to move, which it hardly did. It got so tiring I had to start taking breaks. Well, at one point as I lifted the saw away, the tile snapped in half! I stood there in shock! The tile had suddenly broken-debris flying onto the ground. That's when I thought I'm really glad I take safety precautions like wearing eye protecti...

I poured 100 lbs of concrete!

Custom Building Products is the name of the company who produces all of the flooring materials I have used so far. They include the waterproofing membrane, primer and concrete. I want to give a shout out to their technical support hotline at 800-272-8786. Prior to executing each step, I've called and consulted with the technical advisers at Custom. They've always been available, easy to talk to and given me direction and reassurance on how to execute each step. I am so thankful for their availability and assistance! First I applied the two different coats of waterproofing membrane. Second I applied a primer. Both of these steps were really easy. All I had to do was roll the liquids onto the floor. The waterproof membrane Finally, it was time to pour the concrete! I was most excited about this step because I've only done this once before, when I was a kid. I felt pouring concrete would be a great achievement in my DIY experience. Again, the guys at Custom gave...

Bunk Bed Completed!

We finished painting the bunk bed and we think it looks great! The paint went on really well and it feels nice and smooth. The bunk is held together by 4 inch lag bolts and I was not looking forward to having to wrench down each one of them by hand. So I asked good 'ole trusty Google if some sort of impact driver socket adapter existed. Lo and behold, yes! I found a cheap adapter at Harbor Freight for $3 and it worked out quite well. I'd recommend getting a nicer one if you're going to be installing as part of your profession but if it's going to be a one off thing then this a great bet. It took about an hour for the four of us to assemble it (yes, I put the kids to work).

This Lo Life

Search This Blog